The LC6000 is Intel-compatible, so it can run many Windows and Linux-based applications. This enables the unit to be used in a wide variety of applications - in a restaurant's kitchen system, in an auto ID workstation, etc.
Features:
Ultra compact - only 1.0"h x 6.3"w x 5.1"d
No moving mechanical parts for enhanced reliability
Enclosed in rugged zinc die cast case
Intel compatible 133MHz 486DX2 CPU
5 I/O ports: 1 SVGA port, 1 Ethernet port, 1 USB port, 1 serial port and 1 PS/2 port
3 internal ports: COM2, LPT1 and IDE
32MB to 64MB DRAM
SVGA, up to 1280 x 1024 resolution and a maximum of 16 million colors
Solid state flash hard drive from 16MB to more than 4GB
Fanless and Reliable Retail hardened computers need to be reliable, as they often are used for mission critical applications and not placed in an office environment. The Logic Controls LC7000 provides unparalleled reliability by being a fanless unit. It is an ideal computer for use in harsh environments with high levels of dust or oil or when fan noise is not desirable. For enhanced reliability, LC7000 uses no internal cables and mechanical moving parts such as hard disk drives. For extra harsh enviromental protection, special PCB protective coating is used to resist high humidity and moisture condensation.
Ultra Compact and Rugged LC7000 has a compact form factor - only 1.17"H x 6.50"W x 4.96"D. Two mounting brackets enable these modules to be mounted almost anywhere - on a wall, ceiling, table top or under a counter. For minimum foot-print, the LC7000 module can be mounted vertically. The computer is housed in a rugged die cast case for extra protection.
Full Compliment of I/O Ports The small LC7000 computer provides a very impressive compliment of up-to-date and legacy I/O ports. 4 USB 2.0, DVI/VGA, Ethernet, serial, keyboard/ bump bar, and speaker ports are all available externally. LC7000 uses high performance processors, so it can run Windows and Linux-based graphics and video applications. Whether your application runs on Windows Vista, Windows XP, Windows XP embedded, Windows 2000, Windows CE or Linux, your operating system needs are supported by LC7000.
Features:
Compact size: 6.5" x 5.0" x 1.2"
Fanless operation
No internal moving parts
Enclosed in rugged die cast case, no ventilating holes
CPU speed: up to 600MHz
Mass storage: Compact flash (CF)
128MB to 1GB SODIMM RAM
I/O ports: 4 USB 2.0, DVI/VGA, Ethernet, serial, keyboard/bump bar, audio out, power input
Fanless and Reliable Retail hardened computers need to be reliable, as they often are used for mission critical applications and not placed in an office environment. The Logic Controls LC8200 provides unparalleled reliability by being a fanless unit. It is an ideal computer for use in harsh environments with high levels of dust or oil or when fan noise is not desirable. For enhanced reliability, all of the computer components and connectors reside on one PC board. LC8200's single board computer limits the number of internal cables, a common source of loose connections and failures. A true no-moving-part operation is provided when compact flash is used for mass storage or boot-from-network configurations are employed.
Ultra Compact and Rugged LC8200 has a very compact form factor - only 2"H x 8"W x 6"D. Two mounting brackets enable these modules to be mounted almost anywhere - on a wall, ceiling, table top or under a counter. The computer is housed in a rugged die cast case for extra protection.
Full Compliment of I/O Ports LC8200 also provides a very impressive compliment of up-to-date and legacy I/O ports. Up to 4 serial, 4 USB 2.0, 1 VGA, 1 parallel, 1 ethernet, 1 PS/2, microphone and speaker ports are all available. Hence industrial applications that require serial or parallel interfaces are fully addressed. The LC8200 also uses Intel-compatible, Pentium-class processors, so it can run Windows and Linux-based applications. Whether your application runs on Windows XP, Windows XP embedded, Windows 2000, Windows CE or Linux, your operating system needs are supported by LC8200. This enables the unit to be used in a wide variety of applications - in a restaurant's kitchen system, in a POS workstation, in an auto ID workstation, etc.
Features:
Fanless and ventless operation
Intel Celeron-M 1GHz
Ultra compact - only 2"H x 8"W x 6"L
Mass storage: Compact flash or/and hard disk drive
Enclosed in rugged die cast case
128MB to 1GB SODIMM RAM
No internal connecting cables and no internal moving parts for ultimate reliability with CF mass storage
Large number of available I/O ports: 4 USB 2.0, 4 serial, 1 VGA, 1 Ethernet, 1 PS/2 keyboard/mouse, 1 LPT, speaker out, microphone in, power input
Multimedia: 1280 x 1024 resolution with 32 bit color, AGP 4X, MPEG-2 decoding and video, integrated 128-bit 2D and 64-bit 3D graphics engine, AC97 Audio CODEC
System boot from CF, HDD, USB, or network
Power: Wide range of input voltages, 9 to 24VDC, suitable for mobile applications
Fanless and Reliable Retail hardened computers need to be reliable, as they often are used for mission critical applications and not placed in an office environment. The Logic Controls LC8600 provides unparalleled reliability by being a fanless and ventless unit. It is an ideal computer for use in harsh environments with high levels of dust or oil or when fan noise is not desirable. For enhanced reliability, all of the computer components and connectors reside on one PC board. The LC8600's single board computer limits the number of internal cables, a common source of loose connections and failures. A true no-moving-part operation is provided when compact flash is used for mass storage or boot-from-network configurations are employed.
Ultra Compact and Rugged The LC8600 has a very compact form factor - only 2"H x 8"W x 6"D. Two mounting tabs enable these modules to be mounted almost anywhere - on a wall, ceiling, table top or under a counter. For minimum foot-print, the LC8600 can be mounted vertically. The computer is housed in a rugged die cast case for extra protection.
Full Compliment of I/O Ports The LC8600 provides a very impressive compliment of modern and legacy I/O ports. Up to 4 serial, 7 USB 2.0, 1 VGA, 1 DVI-I, 1 parallel, 1 Ethernet, PS/2 keyboard and mouse, microphone and speaker ports are all available. Hence industrial applications that require serial or parallel interfaces are fully addressed. The LC8600 also uses Intel high performance processors, so it can run all Windows and Linux-based graphics and video applications. Whether your application runs on Windows Vista, Windows XP, Windows XP embedded, Windows 2000, Windows CE or Linux, your operating system needs are supported by the LC8600. This enables the unit to be used in a wide variety of applications - in a restaurant's kitchen system, in a POS workstation, in an auto ID workstation, etc.
Features:
Fanless and ventless operation
Intel Atom CPU 1.6GHz, 512KB L2 Cache
Ultra compact - only 2"H x 8"W x 6"D
No internal connecting cables and no internal moving parts for ultimate reliability with CF mass storage
Enclosed in rugged die cast case
128MB to 2GB DDR2 SODIMM RAM
Large number of available I/O ports: 7 USB 2.0, 4 serial, 1 VGA, 1 DVI-I, 1 Ethernet, PS/2 keyboard and mouse, 1 LPT, speaker out, microphone in, power input
Mass storage: Compact flash and/or PATA/SATA hard disk drive
Multimedia: 2048 x 1536 pixels (QXGA) max, 224MB max shared video memory
Smarbox SB-8200, the fanless POS hardware solutions, uses an Intel 1.6GHz Atom Processor that consumes less power and still achieves high performance. Small footprint and space saving, the SB-8200 is equipped with a 3 track Magnetic Stripe Reader, a 4-Wire Resistive Touch Screen Monitor, and multiple I/O ports. This unit is an excellent fit for any Retail or Hospitality environment and looks great on a counter or mounted into a kiosk.
Print This Page
Send to a Friend